Manufacturer & applicator · Dubai, UAE
Cleaning and protection chemicals for heating and cooling systems.
Kuvars Chem develops, manufactures and applies specialty chemicals for HVAC, boiler and cooling tower systems. 11 products, 23 technical services, R&D since 2003.
Who we are
We make the chemistry and we apply it.
Kuvars Chem is the international brand of Kuvars Kimya, a Turkish R&D manufacturer that has developed, produced and applied specialty chemicals for HVAC, boiler and cooling tower systems since 2003. Our laboratory in Ankara develops the formulations and our technical teams apply them. In the UAE, Kuvars Chem supplies and applies the products from Dubai.
Develop
Formulations developed and tested in the Kuvars Kimya R&D laboratory.
Manufacture
Produced in the Ankara facility; a technical data sheet for every product.
Apply
Applied and documented by the Kuvars Chem technical team on site.
Five product groups, eleven formulations.
Descaling & Neutralisation
Inhibitor-enhanced acidic descalers for exchangers, boilers and new installations, and the neutraliser that completes every cleaning.
Water Treatment & Protection
Molybdate- and phosphate-based corrosion and scale control for closed loops, steam boilers and cooling systems.
Microbial & Biofilm Control
Broad-spectrum biocide for cooling towers, process water and industrial circuits.
Leak Sealing & Waterproofing
Silicate-based sealing for micro-leaks in piping, pools, terraces and subfloors.
Find the right chemistry for your system
Start from the system and the problem you see. Every acidic cleaning ends with NANO CLEAN NR, and we put every cleaned loop on protective dosing.
| System or problem | Product | Note |
|---|---|---|
| Fouled AC coils, AHU or fancoil surfaces (dust, oil, biofilm) | CLIMA CLEAR | Alkaline coil cleaner, 1:3–1:10 |
| Scale in copper, aluminium or mixed-metal exchangers, boilers, condenser tubes | NANO CLEAN → NANO CLEAN NR | Inhibitor-enhanced descaler, then neutralisation |
| Scale and rust in steel or cast-iron boilers, steam generators, pipelines | NANO CLEAN 100 → NANO CLEAN NR | Industrial acidic cleaner, then neutralisation |
| New installation before start-up | NANO CLEAN → NANO CLEAN NR | Two-step pre-commissioning flushing |
| Closed-loop heating, cooling or hot water circulation (no boiling) | NANOSAFE X | Molybdate-based, 0.3–0.6 L/m³, continuous |
| Steam boiler or steam generator, non-food-contact steam | NANOSAFE X 100 | Molybdate-based, 0.3–0.6 L/m³; also closed-loop heating |
| Steam that may contact food or dairy products | NANOSAFE X 200 HAL | Formulated in compliance with FDA criteria, 0.3–0.5 L/m³ |
| Chiller, AHU and fancoil water circuits | NANOSAFE X 300 | Phosphate-based three-in-one, 0.3–0.5 L/m³ |
| Open-circuit cooling tower and tower-connected exchangers, heavy fouling | NANOSAFE X 400 DC | Molybdate-based dispersant, 0.2–0.4 L/m³, treated water |
| Bacteria, algae, biofilm in cooling towers and process water | NANOSAFE BIOCID | Isothiazolinone-based, shock or continuous |
| Micro-leaks in piping, pools, terraces, subfloors | WTR RESIST | Silicate-based sealer, circulated |
What cleaning and protection give you
Efficiency
Energy savings in the 10–40% range recorded on reference projects after chemical cleaning. US DOE data: 0.8 mm of iron- and silica-bearing boiler scale can raise fuel use by up to 7%.
Protection
Inhibitor-enhanced, metal-safe descaling (NANO CLEAN and NANO CLEAN NR) and molybdate- or phosphate-based post-treatment protection (NANOSAFE series) that keeps cleaned surfaces clean.
Compliance
NANOSAFE X 200 HAL formulated in compliance with FDA criteria for food and dairy steam. Technical data sheets for all 11 products. Dubai DET trade licence.
Accountability
One contact from site survey to work record. The technical team that specifies the product also applies it.
Industries we serve
Hotels & Hospitality
Chiller and cooling tower work scheduled around guest operations, plus leak sealing for pools and pipework.
Malls & Commercial Complexes
Chiller plant cleaning and cooling tower treatment for large commercial floor plates.
Food & Beverage / Dairy
Boiler and process-water treatment for food and dairy plants.
Industrial Facilities
Descaling and water treatment for steam boilers and exchangers under severe fouling.
Hospitals & Healthcare
Cooling tower treatment, HVAC cleaning and boiler treatment for critical facilities.
Residential & Villas
Fancoil and boiler cleaning for residential complexes; leak sealing for villa pools and terraces.
District Cooling Operators
Corrosion control for large closed loops and dispersant treatment for cooling towers.
MEP Contractors & Construction
Two-step chemical flushing and leak sealing so the system is handed over clean and protected.
References
250+ projects in Turkey and Kazakhstan
City hospitals, air bases, airports, towers, malls and food plants. UAE projects under way.
Questions we get before the first order
Which descaler do I use for a copper-tube heat exchanger?
NANO CLEAN. It is the inhibitor-enhanced descaler for copper, aluminium, galvanised steel and mixed-metal systems. Use NANO CLEAN 100 for steel and cast-iron equipment. Every acidic cleaning is completed with NANO CLEAN NR.
Do I need NANO CLEAN NR after cleaning?
Yes. Acidic residues left in the system after descaling or flushing have to be neutralised before start-up and before discharge. NANO CLEAN NR restores system pH and is the last step of every chemical cleaning.
What is the difference between NANOSAFE X and NANOSAFE X 100?
NANOSAFE X is for closed-loop heating, cooling and hot water circulation systems that do not boil. NANOSAFE X 100 is formulated for steam boilers and steam generators and is also suitable for closed-loop heating systems. Where steam may contact food or dairy products, the product is NANOSAFE X 200 HAL.
Does NANOSAFE X 200 HAL meet food industry requirements?
It is formulated in compliance with FDA criteria for boiler water treatment in food and dairy applications. The technical data sheet states the formulation basis.
Which product goes into a cooling tower?
NANOSAFE X 400 DC for scale, dispersion and corrosion control in open-circuit cooling towers and tower-connected heat exchangers, on treated (softened) make-up water. NANOSAFE BIOCID for bacteria, algae and biofilm. NANOSAFE X 300 conditions the chiller, AHU and fancoil water circuits.
How much product does a closed loop need?
Typical continuous dosage for NANOSAFE X and NANOSAFE X 100 is 0.3–0.6 L/m³ of system volume, adjusted to water quality and operating conditions. Monitor hardness, conductivity and pH, and analyse the system water periodically.